FixVault
Home › Buick › 2011 › Lucerne CX › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Engine Ground Cable Replacement › Removal Procedure

Removal Procedure

NOTE:
  • Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
  • Always route the replacement cable the same way as the original cable.
    Fig 1: Identifying Engine Ground Cable
    GM1664485Courtesy of GENERAL MOTORS COMPANY
  1. Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement .
  2. Remove the bolt (1) securing the engine ground cable (2) to the right side body frame rail.
    3. Fig 2: Identifying Rear Generator Bolt & Ground Cable
    GM1669928Courtesy of GENERAL MOTORS COMPANY
  3. Remove the rear generator bolt.
  4. Remove the engine ground cable.
About FixVault