FixVault
Home › Buick › 2011 › Lucerne CX › Repair and Diagnosis › Engine Mechanical › Fuel System › Engine Controls And Fuel - 3.9L - Repair Instructions › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Accelerated Pedal Nuts
    GM1671028Courtesy of GENERAL MOTORS COMPANY
  1. Install the accelerator pedal.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the accelerated pedal nuts.

    Tighten 

    Tighten the nuts to 10 N.m (89 lb in).

    3. Fig 2: Identifying Accelerator Pedal Position (APP) Sensor
    GM1671027Courtesy of GENERAL MOTORS COMPANY
  3. Connect the body harness electrical connector (1) to the APP sensor.
  4. Install the left I/P sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
About FixVault