FixVault
Home › Buick › 2011 › Regal CXL › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System - Park Assist System › Diagnostic Information and Procedures › DTC B1015 › Circuit/System Testing › Side Object Sensing Module Malfunction

Side Object Sensing Module Malfunction

  1. Ignition ON, with a scan tool, clear the DTCs.
  2. Ignition OFF.
  3. Wait 60 seconds, then ignition ON and verify the DTC is not reset.
    • If the DTC is reset, replace the side object sensor the code set in.
About FixVault