FixVault
Home › Buick › 2012 › LaCrosse Hybrid › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 2.4L - Repair Instructions › Repair Instructions › Fuel Tank Fuel Pump Module Replacement (NT7) › Installation Procedure

Installation Procedure

    Fig 1: Fuel Tank Module And O-Ring
    GM2205583Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW seal (2) and the fuel tank module (1).
    2. Fig 2: Lock Ring
    GM2205580Courtesy of GENERAL MOTORS COMPANY
  2. Use the J 45722  wrench by turning clockwise and install the lock ring (1).
    3. Fig 3: Fuel Pump Electrical Connector And Quick Connects
    GM2205626Courtesy of GENERAL MOTORS COMPANY
  3. Connect the fuel pump electrical connector (1) and the VPS connector (1) and the quick connects (2). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the fuel tank. Refer to Fuel Tank Replacement (With AWD) , Fuel Tank Replacement (With FWD) .
About FixVault