FixVault
Home › Buick › 2012 › Regal Base › Repair and Diagnosis › Body & Frame › Fixed And MOVEABLE Windows › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

  1. Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
  2. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement
  3. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement
  4. Install the windshield garnish molding. Refer to Windshield Side Garnish Molding Replacement .
  5. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
  6. Connect the rain sensor connector, if equipped.
  7. Connect the diversity antenna, if equipped.
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  9. Close the hood.
About FixVault