FixVault
Home › Buick › 2012 › Regal Base › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Diagnostic Information and Procedures › DTC C0245 › Circuit/System Verification

Circuit/System Verification

  1. Verify that all tires have the proper air pressure.
    • If not the proper air pressure 

      Adjust all tire air pressures to the stated cold air pressure as identified on the tire placard or specification.

    • If the proper air pressure 
  2. Verify that all tires are of uniform size and matching brand.
    • If not of uniform size or matching brand 
    1. Replace the mis-sized or non-matching brand tire.
    2. Operate the vehicle within the Conditions for Running the DTC.
    3. Verify the DTC is not set.
      • If the DTC is set, replace the K17 electronic brake control module.
      • If the DTC does not set.
    4. All OK.
    • If all tires are of uniform size and matching brand 
  3. All OK.
About FixVault