FixVault
Home › Buick › 2012 › Regal Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 2.4L - Repair Instructions › Repair Instructions › Fuel Tank Fuel Pump Module Replacement (NU6) › Removal Procedure

Removal Procedure

    Fig 1: Fuel Pump Electrical Connector & Quick Connects
    GM2205626Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel pump electrical connector (1) and the quick connects (2). Refer to Plastic Collar Quick Connect Fitting Service .
    3. Fig 2: Lock Ring
    GM2205627Courtesy of GENERAL MOTORS COMPANY
  3. Use the J 45722  wrench by turning counter clockwise and remove the lock ring (1).
    4. Fig 3: Fuel Tank Module & O-Ring
    GM2205628Courtesy of GENERAL MOTORS COMPANY
  4. Remove the fuel tank module (1) and the O-ring (2).
About FixVault