FixVault
Home › Buick › 2012 › Regal Base › Repair and Diagnosis › External Pages › Different car › Section 182 (Programming And Setup - All Systems) › Repair Instructions › Inflatable Restraint Sensing and Diagnostic Module Programming and Setup › Sensing and Diagnostic Module Setup

Sensing and Diagnostic Module Setup

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

The replacement of some components will require a setup procedure for complete repair. The SDM Setup Procedure must be performed if any of the following components are replaced:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Inflatable Restraint Sensing and Diagnostic Module Setup and follow the on-screen instructions.
  3. Clear any DTCs after completing the Setup procedure.
About FixVault