Battery Tray Replacement

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Battery Tray

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the battery. Refer to Battery Replacement . Remove the engine control module. Refer to Engine Control Module Replacement for the 2.0L engine or Engine Control Module Replacement for the 2.2L or 2.4L engine. Remove battery current sensor from battery tray bracket.
1	Battery Tray Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 20 N.m (15 lb ft)
2	Battery Tray Tip: Unclip harnesses as necessary.

Callout

Component Name

Preliminary Procedure

Remove the battery. Refer to Battery Replacement .
Remove the engine control module. Refer to Engine Control Module Replacement for the 2.0L engine or Engine Control Module Replacement for the 2.2L or 2.4L engine.
Remove battery current sensor from battery tray bracket.

Battery Tray Bolt (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 20 N.m (15 lb ft)

Battery Tray
Tip: Unclip harnesses as necessary.