FixVault

Component Testing

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Relay Test

  1. Ignition OFF, disconnect the KR49 headlamp low beam relay.
  2. Test for 60-180 Ω between terminals 85 and 86.
    • If not within the specified range, replace the KR49 headlamp low beam relay.
  3. Test for infinite resistance between the following terminals:
    • 30 and 86
    • 30 and 87
    • 30 and 85
    • 85 and 87
    • If not the specified value, replace the KR49 headlamp low beam relay.
  4. Install a 15 A fused jumper wire between relay terminal 85 and 12 V. Install a jumper wire between relay terminal 86 and ground. Test for less than 2 Ω between terminals 30 and 87.
    • If greater than the specified range, replace the KR49 headlamp low beam relay.