Rear Toe Adjustment
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the alignment on an alignment rack. Refer to Wheel Alignment Measurement .
- Rotate the cam nut in order to adjust the toe angle. Refer to Wheel Alignment Specifications .
- Hand tighten the cam bolt, but do not tighten the bolt to the specification yet.
- Reinspect the rear toe angle and adjust as necessary.
- Hold the cam nut and tighten the cam bolt.
Tighten: 150 N.m (111 lb ft)
- Repeat the procedure for the other rear wheel.
- Lower the vehicle.
NOTE:
Do not tighten the new fasteners yet in order to allow for movement.
CAUTION:
Refer to Fastener Caution
.