DTC 53-FF: SRS Unit Programming Error
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Before doing this troubleshooting procedure, find out if the vehicle was in a collision. If so, verify that all the required components were replaced with new components, of the correct part number, and that they were properly installed ( see COMPONENT REPLACEMENT/INSPECTION AFTER DEPLOYMENT ).
- This DTC is indicated when a SRS unit update is not completed properly.
- Do not turn the ignition switch to ACC (I) or to LOCK (0) while updating the SRS unit. If you turn the ignition switch to ACC (I) or to LOCK (0) before you complete the SRS unit update procedure, the SRS unit can be damaged.
- Before doing this troubleshooting procedure, review SRS Precautions and Procedures (see PRECAUTIONS AND PROCEDURES ) and General Troubleshooting Information (see DTC (DIAGNOSTIC TROUBLE CODES) ).
- Do the SRS unit update procedure (see SRS UNIT UPDATE ).
- Read the DTC (see HOW TO RETRIEVE DTCS
).
Is DTC 53-FF indicated?
YES -Replace the original SRS unit (see SRS UNIT REPLACEMENT ).
NO -Update is complete.