FixVault

Circuit/System Testing

WARNING: This page is about a different car, the 2013 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect K59 starter generator control module X2 connector.
  2. Ignition ON, test for 8-18V between the K59 starter generator control module X2 connector accessory voltage circuit terminal 8 and ground.
    • If not within the specified range, test the accessory voltage circuit for a short to ground or an open/high resistance. If the circuit tests normal replace the K59 starter generator control module.