Installation Procedure
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Position the seal to the washer solvent container, pressing in until fully seated.
- Position the washer pump to the washer solvent container pressing, in until fully seated.
- Connect the washer pump electrical connector.
- Connect the washer pump hose.
- Install the front fender liner. Refer to Front Fender Liner Replacement .
- Fill the washer solvent container with washer solvent.
Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor