FixVault
Home › Buick › 2012 › Regal Base › Repair and Diagnosis › Hybrid/Electric Powertrain › Cooling Systems › Hybrid/EV Cooling System › Repair Instructions › Generator Control Module Cooling Air Outlet Duct Replacement › Removal Procedure

Removal Procedure

  1. Disable the hybrid battery. Refer to High Voltage Disabling .
    2. Fig 1: Drive Motor Battery Cooling Blower Outlet Duct Fastener
    GM2571127Courtesy of GENERAL MOTORS COMPANY
  2. Remove the drive motor battery cooling blower outlet duct fasteners (1).
  3. Detach the drive motor cooling blower outlet duct. Refer to Drive Motor Battery Cooling Blower Outlet Duct Replacement .
    4. Fig 2: Generator Control Module Cooling Air Outlet Duct And Tighten Fasteners
    GM2601904Courtesy of GENERAL MOTORS COMPANY
  4. Remove the generator control module cooling air outlet duct fasteners (1) and remove the generator control module cooling air outlet duct (2).
About FixVault