FixVault
Home › Buick › 2012 › Regal Turbo, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 79 (Object Detection System - Park Assist System) › Diagnostic Information and Procedures › DTC B1015 › Circuit/System Testing › Side Object Sensing Module Malfunction

Side Object Sensing Module Malfunction

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, with a scan tool, clear the DTCs.
  2. Ignition OFF.
  3. Wait 60 seconds, then ignition ON and verify the DTC is not reset.
    • If the DTC is reset, replace the side object sensor the code set in.
About FixVault