Rear Side Door Window Weatherstrip Replacement

Fig 1: Rear Side Door Window Weatherstrip

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Glass and Sheet Metal Handling Warning . Preliminary Procedures Remove the rear side door window regulator. Refer to Rear Side Door Window Regulator Replacement (Power) , Rear Side Door Window Regulator Replacement .After the window has been detached from the regulator lower window into the door panel.
1	Rear Side Door Window Weatherstrip Upper Screw CAUTION: Refer to Fastener Caution . Procedure Pull the weatherstrip out of the upper retainer to expose the upper screw. Remove the weatherstrip from the rear lower guide. In order to remove the window weatherstrip from the door frame, remove the window regulator and lower the window down in the door panel so that the rear window weatherstrip can be separated from the door frame. Tighten 3 N.m (27 lb in)
2	Rear Side Door Window Weatherstrip Lower Bolt Tighten 9 N.m (80 lb in)
3	Rear Side Door Window Weatherstrip Procedures Insert the weatherstrip downward in the guide until fully seated. Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the guides. Inspect the door window for proper operation before installing the door trim.