FixVault
Home › Buick › 2013 › Encore Base, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Fluid Reservoir Inlet Pipe Replacement › Installation Procedure

Installation Procedure

  1. Position the power steering fluid reservoir inlet pipe on the vehicle.
    2. Fig 1: P/S Fluid Reservoir Inlet Pipe
    GM2810052Courtesy of GENERAL MOTORS COMPANY
  2. Connect the power steering fluid reservoir inlet pipe (2) to the power steering fluid cooler and secure with the power steering fluid reservoir inlet pipe clamp (1).
    3. Fig 2: Power Steering Fluid Reservoir Inlet Hose
    GM2810051Courtesy of GENERAL MOTORS COMPANY
  3. Install the plastic push pin retainer (3) and secure the power steering fluid reservoir inlet pipe clamp (1) in the plastic clip (3).
    4. Fig 3: Steering Fluid Reservoir Inlet Pipe
    GM2808003Courtesy of GENERAL MOTORS COMPANY
  4. Connect the power steering fluid reservoir inlet pipe (2) to the power steering fluid reservoir and secure with the power steering fluid reservoir inlet pipe clamp (1).
  5. Clean any excess power steering fluid from the vehicle and remove the drain pans.
  6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
About FixVault