FixVault
Home › Buick › 2013 › Verano Base › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Exhaust Pipe Front Hanger Bracket Replacement › Removal Procedure

Removal Procedure

WARNING:

Refer to Exhaust Service Warning .

WARNING:

Refer to Protective Goggles and Glove Warning .

CAUTION:

Refer to Exhaust Flexible Pipe Bending Caution .

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Catalytic Converter, Exhaust Front Pipe Hangar Bracket & Components
    GM2557093Courtesy of GENERAL MOTORS COMPANY
  2. Support the catalytic converter (1) with a suitable tool.
  3. Remove the 2 exhaust front pipe hanger bracket bolts (4) and the 2 drive frame bolts (3).
  4. Remove the 2 exhaust front pipe hanger insulator nuts (5).
  5. Remove the exhaust front pipe hanger bracket (2).
About FixVault