FixVault
Home › Buick › 2013 › Verano Base › Repair and Diagnosis › External Pages › Different car › Section 198 (Battery, Charging System And Starting System) › Repair Instructions › Battery Current Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
  1. Install the current sensor (2) at the battery negative cable (1).
    2. Fig 2: Wiring Harness Current Sensor Plug
    GM2027817Courtesy of GENERAL MOTORS COMPANY
  2. Install the current sensor (5) at the battery tray.
  3. Connect the wiring harness current sensor plug (4).
    4. Fig 3: Battery Negative Cable & Battery Ground Cable Nut
    GM2027762Courtesy of GENERAL MOTORS COMPANY
  4. Install the negative cable (2).
    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the negative cable nut (1) and tighten to 9 N.m (80 lb in).
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
About FixVault