Removal Procedure

WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Standard) .
Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
Remove the steering linkage inner tie rod nut.

Fig 1: Steering Gear Boot Components

Courtesy of GENERAL MOTORS COMPANY

Remove the outer boot clamp (1).
Discard the clamp.
Cut the inner boot clamp (3).
Discard the clamp.
Remove the steering gear boot (2).
Clean the steering linkage inner tie rod and the steering gear boot contact area of any lubricant or debris.