FixVault
Home › Buick › 2013 › Verano Base › Repair and Diagnosis › External Pages › Different car › Section 59 (Audio System) › Sound Quality Diagnosis › Phase Test

Phase Test

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Do this test to confirm proper speaker phasing.

  1. Insert the audio diagnostic CD (T/N 07AAZ-SDBA100) into the audio unit or the audio-navigation unit.
  2. Play track No. 2 (phase) at a normal, or slightly higher than normal, volume level.
  3. The voice should sound centered and focused when it is in-phase.
  4. The voice should sound diffused, and have less bass when it is out of phase.
    • If the voice changes from in-phase to out of phase as indicated by the prompt, the phasing is correct. Go to ELECTRICAL NOISE TEST .
    • If the voice always sounds out of phase, phasing is not correct. Check for:
      • Crossed speaker wire
      • Faulty audio unit or audio-navigation unit
About FixVault