FixVault
Home › Buick › 2013 › Verano Base › Repair and Diagnosis › External Pages › Different car › Section 76 (Instrument Panel Trim And Console Trim) › Repair Instructions › Inflatable Restraint Instrument Panel Module Trim Cover Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Edge Of Trim Cover
    GM2056688Courtesy of GENERAL MOTORS CORP.
  1. Remove the inflatable restraint instrument panel module. Refer to Instrument Panel Inflatable Restraint Module Replacement .
  2. Pull the rear edge of the trim cover (1) downward until the openings in the cover clear the 4 tips of the metal hooks.
    3. Fig 2: Identifying Rear Bottom Edge Of Trim Cover
    GM2056692Courtesy of GENERAL MOTORS CORP.
  3. Flex the rear bottom edge of the trim cover (1) rearward to clear the 4 hooks, and pivot the trim cover upward.
    4. Fig 3: Trim Cover
    GM2056702Courtesy of GENERAL MOTORS CORP.
  4. Pivot the trim cover (1) far enough so the cover can be disengaged from the 5 hooks at the forward side.
About FixVault