|
Preliminary Procedures
- Prepare instrument cluster for replacement, refer to Control Module References
.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection
.
- Remove headlamp switch molding. Refer to Headlamp Switch Molding Replacement
.
- Remove instrument panel steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement
.
- Remove instrument panel instrument cluster hood. Refer to Instrument Panel Instrument Cluster Hood Replacement
.
|
| 1 |
Instrument Cluster Screw (Qty: 2)
Tighten
2.5 (22 lb in) |
| 2 |
Instrument Cluster Washer (Qty: 2) |
| 3 |
Instrument Cluster Procedure
- Disconnect electrical components.
- After repairs, refer to Control Module References
for programming and set up information.
|