Fastener Specifications

Application	Specification
Application	Metric	English
Control Arm to Steering Knuckle Bolt and Nut
First Pass:	50 N.m (1)	37 lb ft (1)
Second Pass: Loosen the Nut	120 Degrees
Third Pass:	50 N.m	37 lb ft
Final Pass:	35 Degrees
Control Arm to Subframe Bolt and Nut - Front
First Pass	70 N.m (1)	52 lb ft (1)
Final Pass	75 - 90 Degrees
Control Arm to Subframe Bolt and Nut- Rear
First Pass	70 N.m (1)	52 lb ft (1)
Final Pass	75 - 90 Degrees (1)
Front Bearing to Steering Knuckle Bolt
First Pass	100 N.m	74 lb ft
Final Pass	20 - 35 Degrees
Front Stabilizer Shaft Insulator Clamp Bolt
First Pass	22 N.m (1)	16 lb ft (1)
Final Pass	30 - 45 Degrees
Front Suspension Strut Mount Nut	65 N.m	48 lb ft
Front Suspension Strut Nut	70 N.m	52 lb ft
Front Suspension Support Bolt
First Pass	60 N.m (1)	44 lb ft (1)
Final Pass	30 - 45 Degrees
Rear Control Arm Bushing to Control Arm
First Pass	55 N.m (1)	41 lb ft (1)
Second Pass	45 Degrees
Final Pass	60 Degrees
Stabilizer Shaft Link to Strut Nut	65 N.m (1)	48 lb ft (1)
Stabilizer Shaft Link to Stabilizer Shaft Nut	65 N.m (1)	48 lb ft (1)
Steering Gear Outer Tie Rod to Steering Knuckle Nut	35 N.m	26 lb ft
Steering Knuckle to Strut Bolt and Nut
First Pass	90 N.m (1)	66 lb ft (1)
Final Pass	60 - 75 Degrees
(1) Use NEW Fastener