Battery Current Sensor Replacement

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Battery Current Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the battery negative cable fastener from the frame strut.
1	Battery Current Sensor Procedure Detach the electrical connector. Ensure that the location measurement of the battery current sensor is recorded for reference during installation. Cut and remove the tape securing the sensor to the negative battery cable. Remove the sensor from the cable.

Callout

Component Name

Preliminary Procedure
Remove the battery negative cable fastener from the frame strut.

Battery Current Sensor

Procedure

Detach the electrical connector.
Ensure that the location measurement of the battery current sensor is recorded for reference during installation.
Cut and remove the tape securing the sensor to the negative battery cable.
Remove the sensor from the cable.