FixVault
Home › Buick › 2016 › Cascada Base › Repair and Diagnosis › External Pages › Different car › Section 76 (Fixed And MOVEABLE Window System) › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
  2. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  3. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement .
  4. Install the left and right windshield garnish molding. Refer to Windshield Side Garnish Molding Replacement .
  5. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
  6. Connect the rain sensor connector, if equipped.
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  8. Close the hood.
About FixVault