FixVault
Home › Buick › 2016 › Cascada Base › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Wiring Harness Replacement › Installation Procedure

Installation Procedure

    Fig 1: Power Steering Wiring Harness
    GM4247054Courtesy of GENERAL MOTORS COMPANY
  1. Instal the power steering wiring harness (1) to the vehicle.
    2. CAUTION:

    Fastener Caution

  2. Nut(2) - Install and tighten 9 N.m (80 lb in)
  3. Nut(3) - Install and tighten 9 N.m (80 lb in)
    4. Fig 2: Fuse Block Cover
    GM4247053Courtesy of GENERAL MOTORS COMPANY
  4. Fuse Block Cover(1) - Install
    5. Fig 3: Power Steering Wiring Harness Bracket
    GM4247051Courtesy of GENERAL MOTORS COMPANY
  5. Install the 2 clips (1) to the power steering wiring harness bracket (2).
    6. Fig 4: Power Steering Assist Motor Electrical Connector
    GM4247052Courtesy of GENERAL MOTORS COMPANY
  6. Clip(2)@Power Steering Assist Motor - Install
  7. Electrical Connector(1) - Connect
  8. Battery Negative Cable Disconnection and Connection - Connect
About FixVault