FixVault
Home › Buick › 2016 › Encore Base, AWD › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Negative Cable Replacement (with KL9) › Removal Procedure

Removal Procedure

    WARNING:

    Refer to Battery Disconnect Warning

    Fig 1: Battery Sensor Electrical Connector
    GM4098026Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the electrical connector. (1)
    2. Fig 2: Battery Negative Cable
    GM4098029Courtesy of GENERAL MOTORS COMPANY
  2. Use an open ended wrench to hold the battery sensor ground tab, while loosening the battery negative cable nut. (1)
  3. Battery Negative Cable Nut (3) - Remove
  4. Battery Negative Cable (2) - Remove
  5. Remove the battery tray. Battery Tray Replacement 
    6. Fig 3: Battery Negative Cable And Negative Cable Frame Ground Fastener
    GM4098013Courtesy of GENERAL MOTORS COMPANY
  6. Battery Negative Cable Frame Ground Fastener (1) - Remove
  7. Battery Negative Cable (2) - Remove
About FixVault