FixVault
Home › Buick › 2016 › Encore Base, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Fluid Cooler Replacement › Removal Procedure

Removal Procedure

  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  2. Front Bumper Fascia - Remove - Front Bumper Fascia Replacement (Trax)Front Bumper Fascia Replacement (Encore)
    3. Fig 1: Power Steering Gear Outlet Hose And Clamp
    GM2812352Courtesy of GENERAL MOTORS COMPANY
  3. Power Steering Gear Outlet Hose Clamp 1 - Disengage
  4. Power Steering Gear Outlet Hose 2 @Power Steering Fluid Cooler - Remove
  5. Remove the plastic push pin (3) from the power steering fluid cooler bracket.
    6. Fig 2: P/S Fluid Reservoir Inlet Pipe
    GM2810052Courtesy of GENERAL MOTORS COMPANY
  6. Power Steering Fluid Reservoir Inlet Pipe Clamp 1 - Disengage
  7. Power Steering Fluid Reservoir Inlet Pipe 2 >@Power Steering Fluid Cooler - Remove
    8. Fig 3: Power Steering Fluid Cooler
    GM2812359Courtesy of GENERAL MOTORS COMPANY
  8. Power Steering Fluid Cooler Bracket Nut 1 - Remove
  9. Remove the power steering fluid cooler (2) from the vehicle.
About FixVault