FixVault
Home › Buick › 2016 › Encore Base, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Fluid Reservoir Inlet Pipe Replacement › Removal Procedure

Removal Procedure

  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
    2. Fig 1: Steering Fluid Reservoir Inlet Pipe
    GM2808003Courtesy of GENERAL MOTORS COMPANY
  2. Power Steering Fluid Reservoir Inlet Pipe Clamp 1 - Disengage
  3. Power Steering Fluid Reservoir Inlet Pipe 2 @Power Steering Fluid Reservoir - Remove
    4. Fig 2: Power Steering Fluid Reservoir Inlet Hose
    GM2810051Courtesy of GENERAL MOTORS COMPANY
  4. Release the power steering fluid reservoir inlet hose (1) from the plastic clip (2) and remove the plastic push pin retainer (3).
    5. Fig 3: P/S Fluid Reservoir Inlet Pipe
    GM2810052Courtesy of GENERAL MOTORS COMPANY
  5. Power Steering Fluid Reservoir Inlet Pipe Clamp 1 - Disengage
  6. Power Steering Fluid Reservoir Inlet Pipe 2 @Power Steering Fluid Cooler - Remove
  7. Remove the power steering fluid reservoir inlet pipe (2) from the vehicle.
About FixVault