FixVault
Home › Buick › 2016 › Encore Base, FWD › Repair and Diagnosis › Transmission › Transfer Case › Power Transfer Unit - AAM › Repair Instructions - On Vehicle › Transfer Case Adapter Replacement › Removal Procedure

Removal Procedure

  1. Remove the transfer case. Refer to Transfer Case Replacement .
    2. Fig 1: Transfer Case-To-Transfer Case Bracket Seal
    GM2759854Courtesy of GENERAL MOTORS COMPANY
  2. Remove and DISCARD the transfer case adapter seal from the transfer case adapter.
    3. Fig 2: Transmission Adapter Bolts
    GM2759903Courtesy of GENERAL MOTORS COMPANY
  3. Remove and DISCARD the five transfer case adapter fasteners (1).
    4. Fig 3: Transmission Bracket And Through Bolt
    GM2759935Courtesy of GENERAL MOTORS COMPANY
  4. Remove and DISCARD the rear transmission mount through bolt (1).
  5. Remove the transfer case adapter (2) from the transmission.
About FixVault