Battery Tray Replacement

WARNING: This page is about a different car, the 2015 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Battery Tray & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the battery. Refer to Battery Replacement . If equipped with 2.4L, remove the engine control module. Refer to Engine Control Module Replacement . If equipped with 3.6L, remove the engine control module. Refer to Engine Control Module Replacement . Remove battery current sensor from battery tray bracket, if necessary.
1	Battery Tray Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 20 N.m (15 lb ft)
2	Battery Tray TIP: Unclip harnesses as necessary.

Callout

Component Name

Preliminary Procedure

Remove the battery. Refer to Battery Replacement .
If equipped with 2.4L, remove the engine control module. Refer to Engine Control Module Replacement .
If equipped with 3.6L, remove the engine control module. Refer to Engine Control Module Replacement .
Remove battery current sensor from battery tray bracket, if necessary.

Battery Tray Bolt (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
20 N.m (15 lb ft)

Battery Tray
TIP: Unclip harnesses as necessary.