FixVault
Home › Buick › 2016 › Envision › Repair and Diagnosis › External Pages › Different car › Section 95 (Cruise Control System) › Diagnostic Information and Procedures › DTC C0460 (Distance Sensing Cruise Control): Steering Wheel Angle Sensor Module › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Vehicle in Service Mode.
  2. Verify that DTC C0460 3A is not set.
    • If the DTC is set 
    1. Install the correct part number B99 Steering Wheel Angle Sensor. Clear DTCs and retest.
    2. Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
      • If the DTC sets, replace the K14 Distance Sensing Cruise Control Module.
      • If the DTC is not set.
    3. All OK.
    • If the DTC is not set 
  3. All OK.
About FixVault