FixVault
Home › Buick › 2017 › Cascada Base › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Diagnostic Information and Procedures › DTC P1793 › Circuit/System Testing

Circuit/System Testing

  1. Observe the Freeze Frame/Failure Records with a scan tool.
  2. Clear the DTCs with a scan tool.
  3. Ignition OFF for 30 s.
  4. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records.
    • If DTC P1793 failed this ignition, replace the K17 Electronic Brake Control Module (EBCM).
About FixVault