FixVault
Home › Buick › 2017 › Cascada Base › Repair and Diagnosis › Electrical › Body Electrical › Wiring Systems And Power Management - Repair Instructions › Repair Instructions › Front Compartment Fuse Block Replacement › Installation Procedure

Installation Procedure

  1. GM2191907

    Push down the 3 electrical connectors (3) before installation of the front compartment fuse block (2).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install front compartment fuse block wiring harness supply (1) and tighten to 12 N.m (106 lb in).
  3. GM2191908

    Install 3 front compartment fuse block bolt (1) and tighten to 7.2 N.m (64 lb in).

  4. GM2191905

    Install the 3 power steering wiring harness nut (2) and tighten to 4.7 N.m (42 lb in).

  5. Close the front compartment fuse block housing cover (1).
  6. Install the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement .
  7. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
About FixVault