FixVault
Home › Buick › 2017 › Cascada Base › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Steering Linkage Inner Tie Rod Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
  4. Remove the steering gear boot. Refer to Steering Gear Boot Replacement .
  5. GM2968098

    Remove the steering linkage inner tie rod (1), using the CH-50751  wrench.

About FixVault