FixVault
Home › Buick › 2017 › Encore Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Current Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the battery negative cable. Refer to Battery Negative Cable Replacement (without KL9) Battery Negative Cable Replacement (with KL9) .
    2. Fig 1: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
  2. Remove the current sensor (2) from the negative battery cable (1).
About FixVault