Removal Procedure
- Drain the cooling system. Cooling System Draining and Filling
- Recover the refrigerant. Refrigerant Recovery and Recharging (R-134a)
- Remove Hood Primary and Secondary Latch - Hood Primary and Secondary Latch Replacement (Buick)
- Remove Air Conditioning Condenser (2) - Air Conditioning Condenser Replacement (LE2)
- Remove Charge Air Cooler (2)- Charge Air Cooler Replacement
- Remove Transmission Fluid Auxiliary Cooler (3) - Transmission Fluid Auxiliary Cooler Replacement (LE2)
- Remove Radiator Surge Tank (6) - Radiator Surge Tank Replacement (LE2)
- Remove Radiator Inlet Hose (2) @Radiator Assembly - Radiator Inlet Hose Replacement (LE2)
- Remove Radiator Outlet Hose (2) @Radiator Assembly - Radiator Outlet Hose Replacement (LE2)
- Remove Transmission Fluid Cooler Inlet Pipe (1) @Radiator Assembly - Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LE2)
- Disconnect the engine coolant temperature sensor electrical connector.
- Disconnect the engine coolant fan connector.
- Remove Radiator Upper Bracket (2) - Radiator Upper Bracket Replacement (LE2)
- Remove Radiator Assembly (1)
- Remove Radiator Bolt (1)
- Remove Engine Coolant Fan Shroud (2)
- Radiator (3)
- Remove Radiator Upper Insulator (1)
- Remove Air Conditioning Condenser Seal (2)
- Remove Radiator Outlet Hose Connector (3) - Radiator Outlet Hose Connector Replacement - Radiator Side (LUV, LE2)
- Remove Engine Coolant Temperature Sensor Retainer (4)
- Remove Engine Coolant Temperature Sensor (5)
- Remove Lower Radiator Frame (6)