FixVault
Home › Buick › 2017 › Encore Preferred II, 1.4L Eng VIN M, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions › Repair Instructions › Ignition Coil Replacement › Removal Procedure

Removal Procedure

  1. Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9)
    3. Fig 1: Ignition Coil Electrical Connectors
    GM3686311Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the electrical connectors (1).
    4. Fig 2: Ignition Coils And Bolts
    GM3686889Courtesy of GENERAL MOTORS COMPANY
  4. Remove the ignition coil bolts (1).
  5. Remove the ignition coils (2).
About FixVault