FixVault
Home › Buick › 2017 › Envision Base › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Brake Pressure Modulator Valve Bracket Replacement › Removal Procedure

Removal Procedure

  1. Place the ignition switch in the OFF position.
    2. Fig 1: EBCM/BPMV and Bracket Assembly
    GM3876206Courtesy of GENERAL MOTORS COMPANY
  2. Remove the electronic brake control module (EBCM) with brake pressure modulator valve (BPMV) assembly (1). Refer to Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement 
    3. Fig 2: BPMV Bolts
    GM3876212Courtesy of GENERAL MOTORS COMPANY
  3. Remove BPMV Bolts (1) (Qty: 2)
    4. Fig 3: BPMV Bracket
    GM3876214Courtesy of GENERAL MOTORS COMPANY
  4. Remove BPMV Bracket (1)
About FixVault