FixVault
Home › Buick › 2017 › Envision Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Shield Replacement (LTG) › Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection 
    2. Fig 1: Air Cleaner Assembly
    GM4530709Courtesy of GENERAL MOTORS COMPANY
  2. Remove Air Cleaner Assembly (2)Air Cleaner Assembly Replacement (LTG)
  3. Raise and support the vehicle. Lifting and Jacking the Vehicle
    4. Fig 2: Generator Bolt
    GM4573844Courtesy of GENERAL MOTORS COMPANY
  4. Remove Generator Bolt (1)
  5. Lower the vehicle.
    6. Fig 3: Generator Bolt And Nut
    GM4573848Courtesy of GENERAL MOTORS COMPANY
  6. Remove Generator Bolt (1)
  7. Remove Generator Nut (2)
  8. Remove Generator Splash Shield (3)
About FixVault