Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
||
|---|---|---|
| Application | Specification | |
| Metric (English) | ||
| Front Lower Control Arm Front Bolt (GNA, GNB) | ||
|
100 N.m (74 lb ft) | |
|
90 - 105 degrees | |
| Front Lower Control Arm Rear Bolt (GNA, GNB) | Torque mating fastener | |
| Front Wheel Bearing and Hub Assembly Bolt(GNA, GNB) | ||
|
100 N.m (74 lb ft) | |
|
60 - 75 degrees | |
| Steering Knuckle Bolt@Front Lower Control Arm (GNB) | Torque mating fastener | |
| Steering Knuckle Bolt@Strut Assembly (GNA) | Torque mating fastener | |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Rear Nut (GNA, GNB) | |
|
100 N.m (74 lb ft) |
|
90 - 105 degrees |
| Front Shock Absorber Yoke Nut (GNB) | 100 N.m (74 lb ft) |
| Front Stabilizer Shaft Insulator Clamp Bolt (GNA, GNB) | 22 N.m (16 lb ft) |
| Front Stabilizer Shaft Link Nut (GNA, GNB) | 100 N.m (74 lb ft) |
| Front Strut Rod Mount Nut (GNA, GNB) | 70 N.m (52 lb ft) |
| Front Suspension Strut Mount Bolt (GNA, GNB) | 35 N.m (26 lb ft) |
| Front Suspension Strut Yoke Upper Ball Joint Nut (GNB) | |
|
65 N.m (48 lb ft) |
|
30 - 45 degrees |
| Steering Knuckle Camber Adjust Nut- Lower (GNB) | |
|
160 N.m (118 lb ft) |
|
45 - 60 degrees |
| Steering Knuckle Camber Adjust Nut- Upper (GNB) | |
|
100 N.m (74 lb ft) |
|
45 - 60 degrees |
| Steering Knuckle King Pin Bolt (GNB) | 9 N.m (80 lb in) |
| Steering Knuckle King Pin Bushing Nut (GNB) | |
|
100 (74 lb ft) |
|
Loosen Both Nuts One Complete Revolution |
|
100 (74 lb ft) |
| Steering Knuckle Nut@Front Lower Control Arm (GNA) | |
|
40 N.m (30 lb ft) |
|
120 - 135 degrees |
| Steering Knuckle Nut@Front Lower Control Arm (GNB) | |
|
160 N.m (118 lb ft) |
|
90 - 105 degrees |
| Steering Knuckle Nut@Strut Assembly (GNA) | |
|
100 N.m (74 lb ft) |
|
45 - 60 degrees |