FixVault
Home › Buick › 2018 › Cascada Base › Repair and Diagnosis › Engine Performance › System › Data Communication System › Diagnostic Information and Procedures › DTC B1016 › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify DTC B1016 is not set.
    • If DTC B1016 is set 
    1. Program the device that set the DTC.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the device that set the DTC.
      • Go to next step: If the DTC does not set
    3. All OK.
    • Go to next step: If DTC B1016 is not set 
  3. All OK
About FixVault