Lower Control Arm Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lower Control Arm

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear coil spring and related parts. Refer to Rear Spring, Insulator, and Jounce Bumper Replacement .
1	Rear Lower Control Arm Nut (Qty: 2)
2	Rear Lower Control Arm Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten Tighten the front control nut to 110 N.m (81 lb ft) plus 45 degrees Tighten the rear control nut to 120 N.m (89 lb ft) plus 60 degrees
3	Rear Lower Control Arm Procedure Align the rear suspension. Refer to Wheel Alignment Specifications .