FixVault
Home › Buick › 2018 › Enclave Base › Repair and Diagnosis › External Pages › Different car › Section 17 (Fixed And MOVEABLE Window System) › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
  2. Remove the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement .
  3. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
  4. Install the windshield garnish molding. Windshield Garnish Molding Replacement - Left Side , and Windshield Garnish Molding Replacement - Right Side .
  5. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  6. Install the windshield wipers arms. Refer to Windshield Wiper Arm Replacement (Traverse)Windshield Wiper Arm Replacement (Acadia)Windshield Wiper Arm Replacement (Enclave) .
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  8. Close the hood.
About FixVault