FixVault
Home › Buick › 2018 › Encore Base › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Fluid Reservoir Inlet Pipe Replacement › Installation Procedure

Installation Procedure

  1. GM2810052

    Position the power steering fluid reservoir inlet pipe (2) on the vehicle.

  2. Power Steering Fluid Reservoir Inlet Pipe (2)@Power Steering Fluid Cooler - Install
  3. Power Steering Fluid Reservoir Inlet Pipe Clamp (1) - Engage
  4. GM2810051

    Install the plastic push pin retainer (3) and secure the power steering fluid reservoir inlet pipe clamp (1) in the plastic clip (2).

  5. GM2808003

    Power Steering Fluid Reservoir Inlet Pipe (2)@Power Steering Fluid Reservoir - Install

  6. Power Steering Fluid Reservoir Inlet Pipe Clamp (1) - Engage
  7. Fill and bleed the power steering system. Power Steering System Bleeding 
About FixVault