FixVault
Home › Buick › 2018 › Encore Base › Repair and Diagnosis › Transmission › Power Transfer Unit/Transfer Case - AAM › Repair Instructions - On Vehicle › Drain Plug Replacement › Installation Procedure

Installation Procedure

  1. GM2767841

    Install the new drain plug.

  2. Tighten the drain plug to 40 N.m (30 lb ft).
  3. Fill the transfer case to the bottom of the fill plug hole.
  4. Install a NEW fill plug and tighten to 40 N.m (30 lb ft).
  5. Lower the vehicle.
About FixVault