FixVault
Home › Buick › 2018 › Envision Base › Repair and Diagnosis › Electrical › Body Electrical › Wiring Systems And Power Management - Repair Instructions › Repair Instructions › Battery Distribution Engine Compartment Fuse Block Replacement › Installation Procedure

Installation Procedure

  1. GM3910776Courtesy of GENERAL MOTORS COMPANY

    Position the junction block and tabs (1) to the battery.

  2. GM3910775Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Position the fuse block wiring harness terminals to the fuse block.

  3. Install the battery positive junction block cable nut (1) and tighten to 12 N.m (106 lb in).
  4. Install the fuse block wiring harness terminal nuts (2) and tighten to 4.7 N.m (42 lb in).
  5. GM3910773Courtesy of GENERAL MOTORS COMPANY

    Install the positive battery cable (2) and tighten to 12 N.m (106 lb in).

  6. Install the small wire and positive battery cable nut (1) and tighten to 9 N.m (80 lb in).
  7. GM3910758Courtesy of GENERAL MOTORS COMPANY

    Install the starter and generator cable.

  8. Install the starter and generator cable nut (1) and tighten to 12 N.m (106 lb in).
  9. Close the fuse block cover.
  10. Battery Negative Cable Disconnection and Connection - Install
About FixVault