FixVault
Home › Buick › 2018 › Envision Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Shield Replacement (LTG) › Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection 
  2. GM4530709Courtesy of GENERAL MOTORS COMPANY

    Air Cleaner Assembly (2) - Remove - Air Cleaner Assembly Replacement (LTG)

  3. Raise and support the vehicle. Lifting and Jacking the Vehicle
  4. Fig 1: Drive Belt Routing (LTG With Generator Shield)
    GM2812339Courtesy of GENERAL MOTORS COMPANY

    Drive Belt (1) - Remove - Drive Belt Replacement (LTG)

  5. GM4573844Courtesy of GENERAL MOTORS COMPANY

    Generator Bolt (1) - Remove

  6. Lower the vehicle.
  7. GM4573848Courtesy of GENERAL MOTORS COMPANY

    Generator Bolt (1) - Remove

  8. Generator Nut (2) - Remove
  9. Raise and support the vehicle. Lifting and Jacking the Vehicle
  10. Generator Splash Shield (3) - Remove
About FixVault